Organic, mineral rust-preventive, anti-corrosive paint.
Base and finish coat glaze, resistant to atmospheric agents, excellent coverage and easy to apply with a brush.
Thinner high solvent power and slow evaporation.
High-protection impregnating gel, high UV rays resistance and to atmospheric agents. Safeguards the environment.
Eco-friendly, protective and decorative glossy-effect glaze, resistant to atmospheric agents, excellent coverage, no “blocking” and high elasticity.
Eco-friendly, organic mineral preparation coat.
Eco-friendly, slow evaporation thinner.
Eco-friendly, protective and decorative satin-effect glaze, resistant to atmospheric agents, excellent coverage, no “blocking” and high elasticity.
Antique-effect, anti-corrosive protective glaze with excellent coverage and easy to apply with a brush.
Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid, with accelerated adhesion. For all types and sizes of porcelain tiles, ceramic tiles and natural stones.
Replaces Biogel Revolution.
Decorative sealant for ceramics, mosaics and swimming pools.
Decorative resin-cement for the grouting of ceramic tiles, mosaics and natural stones. Easy-to-work, high aesthetic finish.
Multipurpose, ultra-flexible, structural gel-adhesive, thixo & fluid. For all types and sizes of porcelain tiles, ceramic tiles and natural stones.
High-performance, expansive, superfluid cement-based binder for concrete, fine grain concrete and mortar.
Gravel with 3-6 mm grading curve.
Waterproof, photochromatic, decorative resin for the grouting and bonding of glass mosaic and low-thickness ceramic tiles. Guarantees aesthetic continuity.
Waterproof decorative resin for the grouting and bonding of ceramic tiles, mosaics and natural stones. Easy to clean, stain-proof.
Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid. For all types and sizes of porcelain tiles, ceramic tiles and natural stones.
Replaces Biogel No Limits.
Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid, with accelerated adhesion. For all types and sizes of porcelain tiles, ceramic tiles and natural stones.
Replaces Biogel Revolution.
Hybrid, structural, multipurpose, extra-flexible, extra-workable Gel-Adhesive. For all types and sizes of porcelain tiles, ceramic tiles and natural stones.
Replaces Biogel Extreme.
Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders.
Coloured wooden skirting board strip, neutral, to be coloured on site or with Legno Nat finish (natural oak wood); designed to match the wall colour.
Self-levelling product with silk effect finish and perfect evenness, ideal for laying resilient material coverings.
Coloured finishing product for Cementoresina Wall vertical coverings.
Waterproofing, osmotic, cement-based protective product for concrete.
Coloured base texturizing agent for Stripe Living resin covering.
Texturizing base coat for Wallcrete and Wallcrete Living resin coverings.
Decorative sealant for ceramics, mosaics and swimming pools.
Coloured texturizing finishing coat for Patina and Patina Living resin coverings.
Decorative resin-cement for the grouting of ceramic tiles, mosaics and natural stones. Easy-to-work, high aesthetic finish.
Ultra-matt, elastic decorative sealant.
Coloured base coat for Cementoresina floors.
Decorative, coloured finishing coat for Cementoresina floors.
Coloured water-based micro-resin with a matt finish for the re-design of all types of furnishing accessories, ceramic and wood coverings and floors.
Decorative water-based paint for external use with a natural finish and high colour resistance. Unparalleled protection of the building from atmospheric agents.
Innovative mineral matrix composite, structural base layer for Cementoresina Wall and for the repair of irregular substrates.
Microresina coloured base coat for the redesign of existing flooring with medium foot traffic.
Smooth finish plaster for Wallpaper Living resin covering. Ideal for preparing flat walls before applying the paint.
Superflat, high performance finish plaster for Wallpaper resin covering.
Polyurethane foam, may be used either with an applicator gun or manually with its application nozzle. Low-pressure polymerisation for moderate post-expansion without deforming the materials.
Bi-axial mesh made of alkali-resistant glass and aramid fibre, specific for strengthening, the improvement and the anti-seismic adaptation for low thickness in reinforced concrete buildings, with brick infill, and masonry structures.
Glass-fibre, alkali-resistant reinforcing mesh, suitable for reinforcing finishing coats on new or old plasters/renders, specifically intended to be inserted in heat-insulating panel systems.
Adhesive for SRP monolithic strengthening of reinforced concrete. Thixotropic, for structural bonding and grouting.
Certified, water-based base coat varnish to protect hardwood floors.
Organic mineral water-based elastomeric resin paint.
Certified, breathable plaster/render made from pure natural NHL lime and geo-binder – Class CS II. Specific for restoration of brick, stone, mixed material, tuff and masonry structures. Ideal as plaster/render for high-thickness finish in certified structural reinforcement, improvement and seismic adaptation systems.
Special synthetic fibre roller designed to improve applied performance of liquid organic varnishes for hardwood floors. Specifically intended to apply HP Technology varnishes.
Metal spreaders to apply organic mineral adhesives.
High modulus hybrid polymer-based adhesive
Mineral adhesive for high adhesion, high-performance laying of porcelain tiles.
Polyester staple fibre non-woven fabric for Bioscud Bioscud BT and Bioscud Artic reinforcement.
Certified, eco-friendly, natural plaster based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and containing natural coloured soils.
Eco-friendly thinner for epoxy and polyurethane resins.
Liquid waterproofing membrane
Detergent to be used as an additive in water used to clean Fugalite.
Tray for washing cement and epoxy grouts on floors and walls, equipped with rollers for cleaning the sponge float and grid for cleaning grout residues. With handle and wheels for easier transport.
Neutral, silane waterproof sealant.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G600 is specific for use in structural strengthening in combination with Geocalce and Geolite mineral matrices or Geolite Gel organic matrix according to project and site requirements.
Plastic acrylic sealant
Certified, eco-friendly, natural finishing coat containing pure NHL 3.5, EN 459-1 compliant lime for highly breathable fine-grain finishing of plasters/renders.
Alkali-resistant fibreglass reinforcing mesh to strengthen synthetic and mineral finishing coats.
Certified, ready-to-use, eco-friendly, extra-rapid setting and drying mineral screed for laying with adhesives.
Organic mineral intermediate coat for the preparation of substrates before applying the decorative cycle.
Eco-friendly, water-based varnish to protect hardwood floors.
Eco-friendly, rapid-drying water-based base coat varnish for the protection of hardwood floors.
Self-levelling, high-performance coloured organic mineral coating for industrial floors.
Eco-friendly, stabilizing primer in a powerful high-binding micro-emulsion.
Transparent sealant for ceramic tiles and mosaics.
Organic, mineral water-based acrylic paint, with waterproofing siloxanes, with high filling power and coverage, matt and compact effect.
Thixotropic agent for synthetic binding or finishing products.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G1200 is specific for use in structural strengthening in combination with Geocalce and Geolite mineral matrices or Geolite Gel organic matrix according to project and site requirements.
Stabilizing primer based on pure powerful high-binding acrylic resins.
Coloured, neutral silicone sealant
Certified, extra rapid, eco-friendly, mineral self-levelling product for the high-performance and high-thickness correction of irregular substrates.
Certified, mineral grout for extremely colour-fast joints from 0 to 5 mm in thickness.
Certified, eco-friendly, fine mineral plaster/render based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and containing natural coloured minerals and marble fillers, for the highly breathable decoration of plaster and render coats.
Regenerating satin-finish treatment to restore worn surfaces in continuous floorings.
Concentrated, wax-removing detergent for the removal of residual wax, oil and grease from resin, resilient materials, marble, ceramic floors.
Certified, eco-friendly, hydraulic, normal-setting and rapid-drying mineral binder for high-performance screeds and heat-radiant slabs.
Certified, universal breathable plaster/finishing coat made of pure natural NHL lime and geo-binder - from 3 to 30 mm. Water-repellent, specific as a levelling plaster/finishing coat for absorbent surfaces or synthetic coverings in the restoration of buildings, the renovation of old facades, and fine Historical Restoration. Thanks to its properties, it is specific for use as anti-collapse protective system for stud walls and as break-away protection system for brick and cement floor slabs. Ideal for finishing certified structural reinforcement systems created with epoxy or mineral matrix.
Mineral adhesive with an extremely low chemical additive content. Longer workability with accelerated adhesion for high performance bonding, with no vertical slip, of porcelain, ceramic and natural stone tiles.
Organic preparation coat for treatment and cleaning of non‑absorbent substrates.
Thin, waterproof polyethylene sheet with high expansion/anti-tear, coated on both sides with polypropylene fabric. Ideal as an anti-cracking waterproofing system/composition for areas with moderate stress.
Electronic measuring device for the non-invasive detection of humidity in substrates and materials.
Balanced bi-axial mesh made of special basalt fibre and AISI 304 stainless steel micro-threads, welded and protected with alkali-resistant treatment, guarantees stability and performance in both directions. Easy to apply, specific for perfect meshing with Geocalce F Antisismico.
Resin for the consolidation of absorbent substrates, the creation of finishings and epoxy screeds, and waterproofing of cement-based substrates with residual moisture.
Decoupling panel in synthetic fibre for the thermal and acoustic insulation, and reduction of transmitted impact noise, to be laid with a thin layer of adhesives from the Biogel range.
Polyurethane with high modulus of elasticity - high strength, for bonding
Detergent for removing streaks of Fugalite.
Coloured or neutral high-performance eco-friendly liquid organic finish for resin floors.
Large-grain, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fine-grain mineral concrete to be used with electro-welded meshes in certified structural reinforcement, improvement and seismic adaptation systems. Suitable for consolidation and repair of masonry works. Certified to improve the safety of buildings.
Calibrated, controlled granulometry mineral quartz, washed, perfectly dry.
Multi-purpose, high-performance coloured organic mineral coating for industrial floors.
Natural, eco-friendly mangiaVOC grout based on exclusive Kerakoll Biogesso for grouting and finishing of plasterboard sheets. Actively absorbs and reduces indoor pollutants.
Certified, ready-to-use, eco-friendly fibre-reinforced, normal-setting and rapid-drying mineral screed to be covered with adhesives.
Highly vapour-permeable coloured organic mineral coating for industrial floors.
Fireproof polyurethane expanding foam
Certified, eco-friendly, natural plaster made with pure natural lime NHL 3.5 according to EN 459-1, for highly breathable plasterwork.
Transparent, neutral silicone sealant
Alkali-resistant reinforcing mesh without memory effect, for Aquastop Nanoflex.
Water-based elastic agent for normal- and rapid-setting mineral adhesives.
Eco-friendly, water-based vapour barrier and waterproofing protection for compact, absorbent and non-absorbent substrates.
Neutral detergent with lavender extract, for cleaning and care of all types of floors.
Ready-to-use, eco-friendly, normal-setting and rapid-drying mineral screed with damp earth consistency to lay with adhesives.
Eco-friendly, stabilizing primer in high binding power, pure acrylic-siloxane micro-emulsions.
AISI 304/316L stainless steel helical bar, with a 6 mm diameter, with high mechanical performance stainless steel helical bar for reinforced grouting of joints using the dry installation system.
Certified, eco-friendly, organic, water-based, mineral waterproofing product for absorbent substrates in damp environments.
Eco-friendly retardant additive for water-based varnish from the Aqua-Pur range.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G3300 is specific for use in structural reinforcements in combination with Geolite Gel organic matrix.
Balanced, bi-axial, alkali-resistant, basalt fibre mesh specific to repair structural elements or protect non-structural elements at risk of collapse and break-away.
Certified, eco-friendly, natural finishing coat containing pure NHL 3.5, EN 459-1 compliant lime for highly breathable polished finishing of plasters/renders.
Calcium carbide hygrometer to measure residual humidity in substrates and materials.
Eco-friendly, water based gel for filling defects and deep cracks.
Eco-friendly, organic, mineral intermediate coat based on water-based siloxane resins, to prepare substrates for the decorative cycle.
Certified, eco-friendly, water-based deep consolidant for absorbent substrates.
Elasto-plastic, thixotropic, solvent-based bituminous adhesive sealant for bonding and waterproof sealing on concrete, glass, metal, wood, porcelain tiles, PVC.
Certified, eco-friendly, natural plaster made with pure natural lime NHL 3.5 according to EN 459-1, for highly breathable plasterwork.
Stabilizing consolidant, based on acrylic resins dissolved in solvent, specifically for old and fragmented render/plaster coats. Safeguards the health of operators.
Pneumatic bender to shape the Geosteel extra-high strength galvanized steel fiber sheets.
Transparent, water-based, organic, liquid impregnating agent, for dust-proof treatment of industrial concrete floors.
Epoxy system for the preparation of substrates before creating resin-based continuous flooring.
Certified, eco-friendly, uniforming, universal mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and natural, micronized casein.
Eco-friendly gel for filling defects and deeper cracks.
Water-based, liquid, acrylic, waterproofing membrane. Suitable for flat and pitched roofs, bituminous layers and external surfaces, flexible, resistant to UV light, atmospheric agents and standing water.
Flexible NBR waterproof joint for perimeter and fractionizing joints in waterproofing systems. For use under ceramic and porcelain tiles and natural stone. Bonds directly on application.
Eco-friendly treatment to protect hardwood floors.
Certified, eco-friendly, natural mortar containing pure NHL 3.5, EN 459-1 compliant lime for highly breathable, rough coating and fragment-filling of masonry.
Low modulus polyurethane sealant for sealing of expansion joints
Extra fast-acting, bonding agent for gaps and cracks.
Water-based, liquid, bituminous, waterproofing membrane. Suitable for roofs, bituminous layers and concrete products, elastomeric, resistant to UV light, atmospheric agents and standing water.
Eco-friendly, water-based oil-resin for the treatment of floors and wooden products in external applications.
Water-based flexibilizing agent for mineral grouts.
Two-component, anti-alkali and chlorine-resistant, mineral waterproofing product with high flexibility, adhesion and durability.
Silicone acetic sealant
Cleaner, ready to use, for removing residues and streaks of epoxy resins.
Specific thinner for diluting Bioscud Artic coloured elastomeric rainproof waterproofing protection when applied as a preparation coat on absorbent substrates.
Certified, natural mortar containing pure NHL 3.5, EN 459-1 compliant lime for highly breathable, rough-coat rendering of masonry.
Organic, mineral, glaze-effect paint covering, based on water-based acrylic-siloxane resins.
Mineral geo-paint for decorative protection of concrete. Breathable, anti-carbonation. Fine grain effect.
PU sealant for under-tile bonding quick curing
High quality ASA perimeter drain with seamless wall-floor sides coated in non-woven polypropylene to guarantee a good seal with Aquastop Nanoflex mineral membrane, using eco-friendly Aquastop Fix sealant and gel adhesives from the Biogel range.
Certified, eco-friendly, breathable, anti-alkali and chlorine-resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives.
Butyl adhesive tape coated in high-adhesion, non-woven, alkali-resistant polypropylene with a pre-cut, silicone film halfway along the back for perimeter joints that also have a bituminous sheath, PVC, wood, polycarbonate, glass, plastic or metal materials.
Transparent, protective water-based micro-resin for Wallcrete and Patina resin coverings.
Composite, natural, mineral matrix, technical plaster/render made from pure natural NHL lime and geo-binder with TPI 3D technology texture, for breathable plastering/rendering with zero crack risk; applicable in thicknesses of up to 30 mm in a single coat. Class CS III and M5.
Mineral adhesive for high performance bonding of porcelain tiles, ceramic tiles and natural stone, with no vertical slip and long open time.
Thermo-dehumidifying, heat cell-based bio-render, R and T / CSII certified. Anti-mould and anti-condensation compliant with EN ISO 13788. High energy-efficient. Fireproof compliant with the Italian Ministerial Decree 16/02/2007 (annexes. D.4.1 and D.4.2). Highly breathable. Natural product for bio-building.
Natural-effect, single component, water-based preparation coat.
Fine-grain, breathable structural geo-mortar made from pure natural NHL range and geo-binder – Class M15. Specific for use as a mineral matrix to be used with Geosteel galvanized steel sheets, Geosteel Grid basalt and stainless steel fibre mesh and Steel Dryfast stainless steel helical bars in certified structural reinforcement, improvement and seismic adaptation systems. Certified to improve the safety of buildings.
Certified, eco-friendly, natural mortar containing pure NHL 3.5, EN 459-1 compliant lime to create extremely breathable rough coats and for the fragment-filling and structural reinforcement of masonry.
Mineral adhesive with an extremely low chemical additive content for high performance bonding with no vertical slip and long open time, for porcelain tiles, ceramic tiles and natural stone.
Organic, mineral quartz water-based styrene-acrylic paint, with anti-biodeteriorating additives, high coverage and matt effect finish.
Reactive waterproofing product with high chemical resistance and high adhesion and flexibility.
Certified, eco-friendly, natural mortar containing pure NHL 3.5, EN 459-1 intended for highly breathable rough rendering and pointing of masonry.
Certified natural plaster made with pure natural lime NHL 3.5 according to EN 459-1, for highly breathable and rendering of the base of walls.
Balanced bi-axial mesh made of special basalt fibre and AISI 304 stainless steel micro-threads, welded and protected with alkali-resistant treatment, guarantees stability and performance in both directions. Easy to apply, specific for perfect meshing with Geocalce F Antisismico.
Eco-friendly, natural, certified, spreader/trowel applied plaster based on selected pure CL 90-S lime putty and containing natural coloured soils, compliant with EN 459-1 standard.
Fluid, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fluid mineral mortar in consolidating injections and as a matrix in combination with Geosteel galvanised steel fibre thread connectors to create certified connections for structural reinforcement, improvement and seismic adaptation. Certified to improve the safety of buildings.
Scraper for joints.
Special calibrated fracture, sharp-edge silicon carbide (SIC) double disk. Superior, extended lifetime. Ideal for removing scratches made by sanders and edge-polishers on all types of wood before final sanding. The three-cut design to gather any harder parts removed during smoothing that could mark the surface guarantees finely sanded floors.
Latex for mineral mortars and slurry keys.
Pre-sanded, unfinished, solid wood strips made from Oak, with tongue-and-groove joints on 2 long sides and chamfer on all 4 sides. Format 50x400 mm, thickness 10 mm. Adhesive laying.
Liquid waterproofing membrane
Certified, eco-friendly, natural wall paint based on selected pure CL 90-S lime putty compliant with EN 459-1 and and naturally coloured pigments.
Single-component, solvent-based adhesion promoter for the preparation of non-absorbent or poorly absorbent and very compact substrates before applying Bioscud, Bioscud BT and Bioscud Fiber.
Organic, eco-friendly mineral finishing product for compact, absorbent substrates and non-absorbent substrates.
Anti-cracking waterproof membrane with high adhesion for balconies, terraces and horizontal surfaces before the laying of ceramic tiles, natural stones and hardwood floors; it creates a waterproof surface even when overlaid on cracked supports, supports that have not been perfectly cured or supports that might contain vapour pressure due to residual substrate moisture content.
Water-based acid detergent to clean cement or lime residues, salt or calcareous deposits.
Pre-sanded, unfinished, solid wood strips made from Oak, with tongue-and-groove joints on 2 long sides and chamfer on all 4 sides. Format 42x300 mm, thickness 10 mm. Adhesive laying.
Manual bender to shape the Geosteel ultra-high strength galvanized steel fibre sheet.
Plastic acrylic sealant, fire resistance class M1
Abrasive net with calibrated fracture, wedge-shaped silicon carbide on both sides. The constant production of new, sharper abrasive grits during processing keeps a fine point on the mineral until it has been completely used, guaranteeing perfectly sanded floors.
Cleaner for guns and PU foams.
Deformable mineral adhesive with an extremely high natural additive content for high performance bonding of porcelain tiles, ceramic tiles and natural stone, with no vertical slip and long open time. Eco-friendly.
Self-expanding foam for filling and fastening.
Eco-friendly base coat varnish for anti-tannin treatment of wooden floors before applying Microresina Parquet.
Rapid self-levelling product for the correction of substrates before laying ceramic tiles, marble and plywood parquet floors.
Universal, consolidant primer for walls.
Mineral adhesive for high adhesion, high-performance laying of porcelain tiles.
Elastic NBR seal for pipes and drains, to be used prior to laying of ceramic, porcelain tiles and natural stone. Applied by cold bonding.
Polyurethane expanding foam. Polymerisation in contact with moisture and air. HCFC-free propellant.
Certified, eco-friendly, natural finishing coat containing pure NHL 3.5, EN 459-1 compliant lime for highly breathable medium-grain finishing of plasters/renders.
Professional detergent for joints hygiene.
Central polypropylene drain with waterproof polyethylene membrane coated on both sides with polypropylene fabric, for use in Kerakoll waterproofing systems.
Latex for mineral levelling and finishing products. Suitable as consolidant primer for plasters/renders and mineral and cement-based absorbent finishing coatings.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G2000 is specific for use in structural strengthening in combination with Geolite Gel organic matrix.
Polypropylene and fibreglass injector, specific thread connector systems, made directly from the extra-strong Geosteel galvanised steel fibre sheets range. Ideal to create fibre thread connecting systems for Geosteel mesh band and mesh sheet strengthening elements.
Certified, ready-to-use, eco-friendly, normal-setting and rapid-drying mineral screed to be covered with adhesives.
Fibre-reinforced thixotropic mortar with compensated shrinkage for reinforced concrete structural repair.
Organic, single-component waterproof sealant, for Aquastop tapes and membranes. Moisture-curing.
Improved adhesion waterproof elastic flange.
The three-layer structure with a waterproofing alkali-resistant TPE central core and polypropylene fibres guarantees extreme compatibility with waterproofing products.
Flexible area in the centre facilitates sealing of pipes and drains.
The AISI 304/316L stainless steel helical bar, with a 8-10-12 mm diameter, is a high mechanical performance stainless steel helical bar for connection and for dry binding of structural elements using the dry installation system.
High-performance, rapid self-levelling product for the correction of absorbent substrates before laying ceramic tiles, hardwood floors, industrial coverings.
Universal, consolidating adhesion promoter for mortars and plasters/renders.
Protective, non-slip, water-based covering, for Nanoflex.
Fluid epoxy system for construction joints, grouting on concrete, synthetic mortars and finishings.
Engineered tongue-and-groove wood planks for internal flooring and paneling, chamfer on 2 sides. Timber type Oak. Format 70x1250 mm, thickness 10 mm. Adhesive laying.
Retractable insert, in fibreglass-reinforced polypropylene, specific to anchor Steel Dryfast 8-10 stainless steel helical bars. The system allows effective mechanical connection of band and widespread strengthening systems created using the Geosteel range of meshes and sheets on vertical load-bearing walls, arches and domes or for consolidation of brick and cement floor slabs subject to break-away of the bottom layer.
Elastic organic adhesive for high-performance and high-adhesion laying with no vertical slip on deformable substrates of porcelain tiles, ceramic tiles and natural stone.
Steel fibers for concrete and mortars with very high mechanical resistance.
High modulus, hybrid polymer-based adhesive sealant
Certified, fast-acting, eco-friendly, mineral levelling product for the high-performance, high-thickness correction of irregular substrates.
TPO-based, high performance waterproofing liquid membrane. Ideal for flat roofs, bituminous layers and external surfaces, flexible even at very low temperatures. Suitable for the containment of water, resistant to UV light and atmospheric agents.
Fibre-reinforced thixotropic mortar with compensated shrinkage for reinforced concrete and masonry structural repair.
Organic, mineral paint, based on water-based acrylic-siloxane resins, with anti-biodeteriorating additives, high coverage and matt effect finish.
Certified, eco-friendly, uniforming mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and selected inert materials.
AISI 304 stainless steel “T” connector between the Steel Dryfast 6 stainless steel helical bar, installed inside the exposed wall surface joints, and the Steel Dryfast 10 stainless steel helical bars, installed to create the dry joining of masonry.
Alkali-resistant, glass fibre mesh suitable for heat-insulating panelling systems made with all types of insulating panels for ETICS use.
High tack hybrid polymer based adhesive.
Acrylic adhesive sealant for anchoring
Compressible, closed-cell expanded polyethylene tape for perimeter and desolidarisation joints.
Compressible, closed-cell expanded polyethylene tape for reduced-thickness perimetric joints of desolidarisation.
Compressible, closed-cell expanded polyethylene tape with fibre support for low-thickness perimetric joints of desolidarisation. With very low volatile organic compound emissions.
Recycled and thermo-bonded polyester, reinforced anti-fracture membrane, specifically designed to absorb shear stresses between substrates and bonded coatings; suitable as reinforcement for the laying of ceramic tiles of all kinds, large formats, porcelain tiles and natural stone.
Rapid universal adhesion promoter for self-levelling products, cement-based adhesives, finishing products and plasters/renders. Quartz finish.
Certified, eco-friendly natural intermediate filling coat based on pure stabilized potassium silicate.
Certified, eco-friendly, natural wall paint based on pure stabilized potassium silicate, with natural coloured earths and minerals.
Natural, eco-friendly, breathable, stabilizing cortical consolidant based on pure stabilized potassium silicate, solvent-free.
Certified, eco-friendly, natural fine render, based on pure stabilised potassium silicate, completely coloured with natural soils and minerals.
Protective water-based impregnating finish for Patina and Patina Living resin coverings.
Multipurpose, ultra-flexible, structural gel-adhesive, thixo & fluid. For all types and sizes of porcelain tiles, ceramic tiles and natural stones.
Certified, eco-friendly, organic adhesive for bond when used to secure tongue-and-groove ends in floating hardwood floors and laminated floors.
Certified, organic, mineral adhesive for the high-performance laying of hardwood floors.
Organic, elastic mineral adhesive for the high-performance laying of hardwood floors.
Certified, thixotropic, eco-friendly, normal-setting mineral levelling product for the high-performance correction and prolonged workability of irregular substrates.
Decorative water-based paint with an extra-matt natural finish and high colour depth.
Organic, mineral paint, based on water-based styrene-acrylic resins, washable and resistant to mould.
Water-based decorative resin-paint with washable and wipeable matt-finish and high chromatic intensity. Ideal for decorating walls requiring more cleaning (kitchen, bathroom, kid bedrooms) and high traffic areas (hallways, staircases).
Organic, velvety, mineral breathable paint, based on water-based vinyl resins with high coverage and matt effect finish.
Breathable, organic, mineral paint with high filling power, high coverage and matt effect finish.
Certified, eco-friendly, elastic, organic, mineral adhesive for the high-performance laying of hardwood floors.
Organic, elastic mineral adhesive for the high-performance laying of hardwood floors.
Hybrid adhesive for bonding of hardwood floors, isocyanate and solvent free
Certified, eco-friendly, organic, mineral adhesive for the high-performance laying of hardwood floors.
Sub-joint layer in closed-cell, CFC- and HCFC-free expanded polyethylene for static filling and dynamic joints with different degrees of expansion.
Self-expanding foam for filling and fastening. Fire-resistant.
Natural, eco-friendly mangiaVOC finishing product and decorative fine plaster/render based on exclusive Kerakoll Biogesso which actively absorbs and reduces indoor pollutants.
Organic, mineral paint, based on water-based styrene-acrylic resins with high coverage, high filling power and matt effect finish.
Organic, mineral paint, based on water-based styrene-acrylic resins, super-washable and resistant to mould.
Self-levelling gel with variable rheology and viscosity. Prolonged workability and reduced waiting times before laying.
Low-density ETICS adhesive-finishing product with NHL lime for the laying of mineral and natural heat-insulating panels.
High performance, fibre-reinforced finishing product for ETICS use, hail- and collision-resistant, for repairing damages and deterioration.
Mineral geo-mortar with geo-binder base for FRC monolithic strengthening of reinforced concrete. Pourable and fibre-reinforced with Steel Fiber.
ETICS adhesive-finishing product for the laying of heat-insulating panels on absorbent substrates.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, semi-rapid setting 40 min.
ETICS adhesive-finishing product with enhanced adhesion specific for anchor-less Klimaexpert ETA EPS.
Inco-Tex fabric pad to clean, maintain and polish floors.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, normal setting 80 min.
Low-density ETICS adhesive-finishing product for the laying of heat-insulating panels.
Mineral geo-mortar with geo-binder base for monolithic grouting in reinforced concrete. Pourable, rapid setting 20 min.
ETICS adhesive-finishing product with increased grain size for the high-adhesion laying of heat-insulating panels.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, rapid setting 10 min.
ETICS adhesive-finishing product for the high-adhesion laying of heat-insulating panels.
High ductility, fibre-reinforced thixotropic mortar for concrete and masonry reconstruction.
Rapid-setting, fibre-reinforced semi-thixotropic mortar for road, industrial and urban maintenance work.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Multipurpose, pourable, normal setting 60 min.
Innovative polymer matrix composite structural support for Cementoresina floors.
Mineral, lightened geo-mortar/finishing product for concrete reconstruction and finishing. Thixotropic. Thicknesses from 2 to 50 mm.
Flexibilizing agent for mineral mortars and fine grain concrete.
Eco-friendly, mineral finishing coat.
Eco-friendly, fine, mineral plaster/render finish.
Eco-friendly, fine, mineral plaster/render finish.
Eco-friendly, thixotropic, extra-rapid setting and hardening mineral mortar, suitable for high-performance anchoring.
Eco-friendly, mineral finishing coat.
Organic mineral conductive adhesive to lay rubber, PVC and linoleum conductive floors on absorbent and non-absorbent substrates.
Organic mineral adhesive to lay rubber, PVC and carpet flooring and artificial turf on absorbent and non-absorbent substrates.
Certified, eco-friendly, organic mineral adhesive to lay standard and needle-punched carpeting.
Eco-friendly, organic adhesive for the fixing of self-laying PVC and rubber floor coverings on compact absorbent and non-absorbent substrates.
Certified, eco-friendly, organic mineral adhesive to lay vinyl floors and carpet on absorbent substrates.
Eco-friendly, mineral, organic grout for a highly flexible and ultra-smooth final finish.
Eco-friendly stabilizing agent to strengthen old and fragmented plaster/render coats.
Eco-friendly, fine, mineral plaster/render finish.
Eco-friendly, single-component mineral adhesive&finishing product.
Certified, eco-friendly, organic mineral adhesive to lay PVC and PVC-backed materials on absorbent substrates.
Organic, neoprene fluid adhesive for the double-spread laying of PVC, rubber, carpeting and linoleum.
Certified, organic mineral adhesive, eco-friendly, to lay PVC, LVT and rubber floors and coverings up to a thickness of 3 mm, linoleum and carpet on absorbent substrates.
Organic, neoprene adhesive for the double-spread laying of PVC, rubber, carpeting and linoleum.
Water-based, liquid, acrylic, fibre-reinforced, waterproofing membrane. Suitable for roofs, bituminous layers and external surfaces subject to foot traffic, flexible, resistant to UV light, atmospheric agents and standing water.
Non-slip coating with high resistance to wear, suitable for foot traffic, for surfaces waterproofed with rainproof protection from the Bioscud range, resistant to UV light, atmospheric agents and standing water.
Certified, eco-friendly, organic mineral adhesive to lay small and medium-format hardwood floors.
Extra-quick-setting and hardening mortar for instant blocking of water leaks.
Certified, water-based varnish to treat hardwood floors.
Professional cleaning wipes
Rapid drying, degreasing detergent for the preparation of substrates, smoothing of joints and post-installation cleaning.
Certified, eco-friendly, natural uniforming intermediate coat based on pure stabilized potassium silicate.
Hybrid sealant under-tile bonding quick curing
NBR rubber, under-tile waterproof elastic tape coated on both sides with high-adhesion non-woven polypropylene for structural joints in waterproofing systems on balconies, terraces and flat roofs coated with ceramic tiles and stone material.
Epoxy protective product with high chemical resistance for concrete.
Improved adhesion waterproof elastic tape for joints. The three-layer structure with a waterproofing alkali-resistant TPE central core and polypropylene fibres guarantees extreme compatibility with waterproofing products.
Expansive pourable mortar for structural grouting.
Eco-friendly, water-repellent, breathable protective impregnating, water-drop effect product, that does not alter the colour of materials treated.
Water-based restoring product.
High coverage wall paint containing Pliolite resins for stained and marked substrates.
Eco-friendly, high diffusion power consolidant based on ethyl esters from silicic acid.
Eco-friendly, water-repellent impregnating product, with water-drop effect and high penetration capacity.
Self-expanding foam for filling and fastening. Fire-resistant.
Organic mineral covering, completely coloured.
Eco-friendly, organic, mineral, elastomeric resin paint that is flexible and resistant to algae and atmospheric agents.
Resin covering for external use with a coloured-body material texture and high colour resistance. Unparalleled protection of the building from atmospheric agents.
Organic, mineral covering, completely coloured, based on water-based siloxane resins.
Organic, fibrous, mineral covering, completely coloured, based on water-based acrylic-siloxane resins and waterproofing siloxanes.
Eco-friendly, organic, fibrous, mineral covering, completely coloured, based on water-based acrylic-siloxane resins and waterproofing siloxanes.
Organic, mineral, heat-insulating paint based on water-based vinyl resins, washable and resistant to mould.
Water-repellent, strengthening, high diffusion power protective product.
Organic, mineral, breathable paint, containing water-based vinyl-versatate resins.
Self-expanding foam for filling and fastening.
Nourishing wax to prevent wear in continuous floors.
Driver attachment with coupling for SDS Plus percussion or hammer drill for installing Steel Dryfast stainless steel helical bars.
Anti-corrosive cement-based protective product for reinforcing bars.
Anti-carbonation, elastic, cement-based protective product for concrete.
Fibre-reinforced pourable mortar with compensated shrinkage for reinforced concrete structural repair.
Decorative sealant for marble and natural stone.
Hyperfluid epoxy system for the injection of cracks and grouting on concrete.
Mineral grout for ceramic tiles and natural stone. High workability and high-performance, ultra-cleanable.
RAL finish neutral silicon sealant. Window installations and woodworking. Glazing and sealing.
Transparent gel for Cementoresina floors and coverings.
Water-based, transparent micro-resin for the protection of technical and decorative systems.
Trowel 2: smooth spreader, indispensable for the laying of Cementoresina 1, Cementoresina 2 and Cementoresina Wall.
Trowel 3: transparent plastic spreader, essential to apply the Cementoresina Gel protective.
Specific tool indispensable for the laying of Stripe.
Decorative separators and corners to finish ceramic coverings.
Sponges, felt pads and accessories for grouting of ceramic tiles and natural stones with Fugabella mineral grouts and Fugalite organic grouts.
Pack of 100 carbide vials for Gerät hygrometer.
Rubber spreader for grouting of ceramic tiles, glass mosaic and natural stones using eco-friendly, organic mineral grout.
PVC spacers.