Info & Specs
Bioscud is easy to apply on large surfaces to ensure the waterproofing and the highly reflective protective decoration (Cool Roof) even of old, pre-shaped bituminous layers; it adapts to any shape, as to avoid overheating the rooms below.
white RAL 9010
grey RAL7038
sand RAL 1013
red RAL 3013
green RAL 6017
- Specifically intended for decorative waterproofing of flat roofs
- Certified for highly reflective protective decoration – Cool Roof (white colour) of old pre-shaped bituminous layers as well
- Broof certificate (t2) (t3) according to EN 13501-5
- Ready-to-use water emulsion with a high level of elasticity for highly deformable substrates
- Resistant to standing water, UV light and atmospheric agents, it does not need protection
white RAL 9010
grey RAL7038
sand RAL 1013
red RAL 3013
green RAL 6017
Pack
20 / 5 / 1 kg buckets
Coverage
≈ 2 kg/m2
Shelf life
≈ 18 months
Bioscud Primer
Single-component, solvent-based adhesion promoter for the preparation of non-absorbent or poorly absorbent and very compact substrates before applying Bioscud, Bioscud BT and Bioscud Fiber.
Bioscud DL
Specific thinner for diluting Bioscud Artic coloured elastomeric rainproof waterproofing protection when applied as a preparation coat on absorbent substrates.
Bioscud BT
Water-based, liquid, bituminous, waterproofing membrane. Suitable for roofs, bituminous layers and concrete products, elastomeric, resistant to UV light, atmospheric agents and standing water.