Skip to main content
Go to Homepage
4263

Geocalce Tenace

Composite, natural, mineral matrix, technical plaster/render made from pure natural NHL lime and geo-binder with TPI 3D technology texture, for breathable plastering/rendering with zero crack risk; applicable in thicknesses of up to 30 mm in a single coat. Class CS III and M5.

Info & Specs

Geocalce Tenace is a geo-mortar with double mark, compressive strength class CS III according to standard EN 998-1 and M5 according to standard EN 998-2. Specifically designed for guaranteed anti-crack plastering/rendering, it can be applied in thicknesses of up to 30 mm in a single coat. Thanks to its properties, it is specific for use as anti-collapse protective system for stud walls and as break-away protection system for brick and cement floor slabs. Ideal as plaster/render for high-thickness finish in certified structural strenghtening, improvement and seismic adaptation systems, ideal in Historical Restoration.
  • Natural and breathable, allows walls to breath
  • Prevention and control of crack formation
  • Absorption of stress due to thermal expansion or shrinkage
  • Greater flexural and tensile strength, greater resistance to impact 
  • Greater resistance to atmospheric agents
  • Better thixotropy to facilitate its application 
  • Can be applied by hand or machine

Pack

25 kg bags

Coverage

≈ 16 kg/m2 per cm of thickness

Shelf life

≈ 12 months

Downloads

Technical Data Sheet
630.79 KB
DOP
279.33 KB
Safety Data Sheet
1.31 MB

Other in

Geo-mortars for masonry

Image of Geocalce G Antisismico
Geocalce G Antisismico

Large-grain, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fine-grain mineral concrete to be used with electro-welded meshes in certified structural reinforcement, improvement and seismic adaptation systems. Suitable for consolidation and repair of masonry works. Certified to improve the safety of buildings.

Image of Geocalce Multiuso
Geocalce Multiuso

Certified, universal breathable plaster/finishing coat made of pure natural NHL lime and geo-binder - from 3 to 30 mm. Water-repellent, specific as a levelling plaster/finishing coat for absorbent surfaces or synthetic coverings in the restoration of buildings, the renovation of old facades, and fine Historical Restoration. Thanks to its properties, it is specific for use as anti-collapse protective system for stud walls and as break-away protection system for brick and cement floor slabs. Ideal for finishing certified structural reinforcement systems created with epoxy or mineral matrix.

Image of Geocalce FL Antisismico
Geocalce FL Antisismico

Fluid, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fluid mineral mortar in consolidating injections and as a matrix in combination with Geosteel galvanised steel fibre thread connectors to create certified connections for structural reinforcement, improvement and seismic adaptation. Certified to improve the safety of buildings.