Skip to main content
Go to Homepage
4267

Geocalce Intonaco

Certified, breathable plaster/render made from pure natural NHL lime and geo-binder – Class CS II. Specific for restoration of brick, stone, mixed material, tuff and masonry structures. Ideal as plaster/render for high-thickness finish in certified structural reinforcement, improvement and seismic adaptation systems.

Info & Specs

Geocalce Intonaco is a CS II resistance class geo-mortar according to EN 998-1, for procedures on highly breathable walls.
  • Health and safety
  • The first breathable lime-based structural mortars that ensure high permeability to vapour. Used in combination with Kerakoll strengthening systems, they increase the mechanical resistance of the existing walls in order to improve the structural safety of the building.
  • Low elastic modulus
  • Thanks to the use of NHL lime and the geo-binder, the Geocalce range features a low elastic modulus that creates a perfect balance with characteristic strengths typical of masonry structures of all types.
  • Culture and tradition
  • The Geocalce range respects and satisfies the needs of applications on buildings subjected to Historical Restoration of Environmental and Architectural Heritage buildings and on traditional buildings.
  • Bacteriostatic and fungistatic product (CSTB method)

Pack

25 kg bags

Coverage

≈ 13 kg/m2 per cm of thickness

Shelf life

≈ 12 months

Downloads

Technical Data Sheet
603.05 KB
DOP
239.97 KB
Safety Data Sheet
883.32 KB

Other in

Geo-mortars for masonry

Image of Geocalce G Antisismico
Geocalce G Antisismico

Large-grain, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fine-grain mineral concrete to be used with electro-welded meshes in certified structural reinforcement, improvement and seismic adaptation systems. Suitable for consolidation and repair of masonry works. Certified to improve the safety of buildings.

Image of Geocalce Tenace
Geocalce Tenace

Composite, natural, mineral matrix, technical plaster/render made from pure natural NHL lime and geo-binder with TPI 3D technology texture, for breathable plastering/rendering with zero crack risk; applicable in thicknesses of up to 30 mm in a single coat. Class CS III and M5.

Image of Geocalce Multiuso
Geocalce Multiuso

Certified, universal breathable plaster/finishing coat made of pure natural NHL lime and geo-binder - from 3 to 30 mm. Water-repellent, specific as a levelling plaster/finishing coat for absorbent surfaces or synthetic coverings in the restoration of buildings, the renovation of old facades, and fine Historical Restoration. Thanks to its properties, it is specific for use as anti-collapse protective system for stud walls and as break-away protection system for brick and cement floor slabs. Ideal for finishing certified structural reinforcement systems created with epoxy or mineral matrix.