Skip to main content
Go to Homepage
4727

Durasoft System

Multi-grain abrasive system which, thanks to the combined action of grains of different hardnesses and diameters, produces an extra-fine finish on wood floors before covering with HP-technology varnishes.

Info & Specs

Duragrip 120 is specifically intended to remove excess Aqua-Pur Flex grout and smoothly buff away scratches guaranteeing the best surface possible prior to varnishing.
Duragrip 180 is for the additional smoothing of wood surfaces, guaranteeing an extra-fine finish prior to varnishing. Ideal for more thorough sanding between the varnish coats.
Specifically intended for sanding between the varnish coats, Duragrip 220 deep eliminates woodfibers without damaging the varnish, increases substrate adhesion, guaranteeing the highest quality finish.
  • Specific system ideal for the perfect preparation and finishing of wooden floors of whatever type, both prior to varnishing and between coats of varnish

Pack

Softpad Ø 407 mm
Duragrip 120
Duragrip 180
Duragrip 220

Other in

Abrasives

Image of Duradisc 2 Sic
Duradisc 2 Sic

Special calibrated fracture, sharp-edge silicon carbide (SIC) double disk. Superior, extended lifetime. Ideal for removing scratches made by sanders and edge-polishers on all types of wood before final sanding. The three-cut design to gather any harder parts removed during smoothing that could mark the surface guarantees finely sanded floors.

Image of Carboplus Sic
Carboplus Sic

Abrasive net with calibrated fracture, wedge-shaped silicon carbide on both sides. The constant production of new, sharper abrasive grits during processing keeps a fine point on the mineral until it has been completely used, guaranteeing perfectly sanded floors.

Image of Pad
Pad

Inco-Tex fabric pad to clean, maintain and polish floors.