Repair, structural and anti-seismic strengthening
Expansive pourable mortar for structural grouting.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, normal setting 80 min.
Fine-grain, breathable structural geo-mortar made from pure natural NHL range and geo-binder – Class M15. Specific for use as a mineral matrix to be used with Geosteel galvanized steel sheets, Geosteel Grid basalt and stainless steel fibre mesh and Steel Dryfix stainless steel helical bars in certified structural reinforcement, improvement and seismic adaptation systems.
Certified to improve the safety of buildings.
Mineral geo-paint for decorative protection of concrete. Breathable, anti-carbonation. Fine grain effect.
Adhesive for SRP monolithic strengthening of reinforced concrete. Thixotropic, for structural bonding and grouting.
High-performance, expansive, superfluid cement-based binder for concrete, fine grain concrete and mortar.
Universal, consolidating adhesion promoter for mortars and plasters/renders.
Epoxy protective product with high chemical resistance for concrete.
Large-grain, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fine-grain mineral concrete to be used with electro-welded meshes in certified structural reinforcement, improvement and seismic adaptation systems. Suitable for consolidation and repair of masonry works. Certified to improve the safety of buildings.
Fibre-reinforced thixotropic mortar with compensated shrinkage for reinforced concrete and masonry structural repair.
Fluid epoxy system for construction joints, grouting on concrete, synthetic mortars and finishings.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, rapid setting 10 min.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G600 is specific for use in structural strengthening in combination with Geocalce and Geolite mineral matrices or Geolite Gel organic matrix according to project and site requirements.
Fluid, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fluid mineral mortar in consolidating injections and as a matrix in combination with Geosteel galvanised steel fibre thread connectors to create certified connections for structural reinforcement, improvement and seismic adaptation. Certified to improve the safety of buildings.
Waterproofing, osmotic, cement-based protective product for concrete.
Fibre-reinforced pourable mortar with compensated shrinkage for reinforced concrete structural repair.
Hyperfluid epoxy system for the injection of cracks and grouting on concrete.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, semi-rapid setting 40 min.
Anti-carbonation, elastic, cement-based protective product for concrete.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G1200 is specific for use in structural strengthening in combination with Geocalce and Geolite mineral matrices or Geolite Gel organic matrix according to project and site requirements.
Fibre-reinforced thixotropic mortar with compensated shrinkage for reinforced concrete structural repair.
Composite, natural, mineral matrix, technical plaster/render made from pure natural NHL lime and geo-binder with TPI 3D technology texture, for breathable plastering/rendering with zero crack risk; applicable in thicknesses of up to 30 mm in a single coat. Class CS III and M5.
Extra-quick-setting and hardening mortar for instant blocking of water leaks.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G2000 is specific for use in structural strengthening in combination with Geolite Gel organic matrix.
Mineral, lightened geo-mortar/finishing product for concrete reconstruction and finishing. Thixotropic. Thicknesses from 2 to 50 mm.
Gravel with 3-6 mm grading curve.
Certified, breathable plaster/render made from pure natural NHL lime and geo-binder – Class CS II. Specific for restoration of brick, stone, mixed material, tuff and masonry structures. Ideal as plaster/render for high-thickness finish in certified structural reinforcement, improvement and seismic adaptation systems.
Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G3300 is specific for use in structural reinforcements in combination with Geolite Gel organic matrix.
Certified, universal breathable plaster/finishing coat made of pure natural NHL lime and geo-binder - from 3 to 30 mm. Water-repellent, specific as a levelling plaster/finishing coat for absorbent surfaces or synthetic coverings in the restoration of buildings, the renovation of old facades, and fine Historical Restoration. Thanks to its properties, it is specific for use as anti-collapse protective system for stud walls and as break-away protection system for brick and cement floor slabs. Ideal for finishing certified structural reinforcement systems created with epoxy or mineral matrix.
Balanced bi-axial mesh made of special basalt fibre and AISI 304 stainless steel micro-threads, welded and protected with alkali-resistant treatment, guarantees stability and performance in both directions. Easy to apply, specific for perfect meshing with Geocalce and Biocalce mineral matrices according to project and site requirements.
Balanced bi-axial mesh made of special basalt fibre and AISI 304 stainless steel micro-threads, welded and protected with alkali-resistant treatment, guarantees stability and performance in both directions. Easy to apply, specific for perfect meshing with Geocalce F Antisismico.
Balanced, bi-axial, alkali-resistant, basalt fibre mesh specific to repair structural elements or protect non-structural elements at risk of collapse and break-away.
Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Multipurpose, pourable, normal setting 60 min.
Bi-axial mesh made of alkali-resistant glass and aramid fibre, specific for strengthening, the improvement and the anti-seismic adaptation for low thickness in reinforced concrete buildings, with brick infill, and masonry structures.
Mineral geo-mortar with geo-binder base for monolithic grouting in reinforced concrete. Pourable, rapid setting 20 min.
Mineral geo-mortar with geo-binder base for FRC monolithic strengthening of reinforced concrete. Pourable and fibre-reinforced with Steel Fiber.
Rapid-setting, fibre-reinforced semi-thixotropic mortar for road, industrial and urban maintenance work.
The AISI 304/316 stainless steel helical bar, with a 8 mm diameter, is a high mechanical performance stainless steel helical bar for dry binding of structural elements using the Helifix patented installation system.
The AISI 304/316 stainless steel helical bar, with a 10 mm diameter, is a high mechanical performance stainless steel helical bar for dry binding of structural elements using the Helifix patented installation system.
The AISI 316 stainless steel helical bar, with a 12 mm diameter, is a high mechanical performance stainless steel helical bar for dry binding of structural elements using the Helifix patented installation system.
AISI 304 stainless steel helical bar, with a 6 mm diameter, with high mechanical performance stainless steel helical bar for reinforced grouting of joints using the Helifix patented installation system.
AISI 304 stainless steel “T” connector between the Steel Helibar 6 stainless steel helical bar, installed inside the exposed wall surface joints, and the Steel Dryfix 10 stainless steel helical bars, installed to create the dry joining of masonry.
Polypropylene and fibreglass injector, specific thread connector systems, made directly from the extra-strong Geosteel galvanised steel fibre sheets range. Ideal to create fibre thread connecting systems for Geosteel mesh band and mesh sheet strengthening elements.
Retractable insert, in fibreglass-reinforced polypropylene, specific to anchor Steel Dryfix 8 stainless steel helical bars. The system allows effective mechanical connection of band and widespread strengthening systems created using the Geosteel range of meshes on vertical load-bearing walls, arches and domes or for consolidation of brick and cement floor slabs subject to break-away of the bottom layer.
Retractable insert, in fibreglass-reinforced polypropylene, specific to anchor Steel Dryfix 10 stainless steel helical bars. The system allows effective mechanical connection of band and widespread strengthening systems created using the Geosteel range of meshes on vertical load-bearing walls, arches and domes or for consolidation of brick and cement floor slabs subject to break-away of the bottom layer.
Patented driver attachment for installation of Steel Dryfix 8 stainless steel helical bars.
Manual bender to shape the Geosteel ultra-high strength galvanized steel fibre sheet.
Pneumatic bender to shape the Geosteel extra-high strength galvanized steel fiber sheets.