Certified, eco-friendly, breathable, anti-alkali and chlorine-resistant, mineral membrane for the flexible waterproofing with high levels of adhesion and durability of substrates before laying with adhesives.
Anti-cracking waterproof membrane with high adhesion for balconies, terraces and horizontal surfaces before the laying of ceramic tiles, natural stones and hardwood floors; it creates a waterproof surface even when overlaid on cracked supports, supports that have not been perfectly cured or supports that might contain vapour pressure due to residual substrate moisture content.
Thin, waterproof polyethylene sheet with high expansion/anti-tear, coated on both sides with polypropylene fabric. Ideal as an anti-cracking waterproofing system/composition for areas with moderate stress.
Organic, single-component waterproof sealant, for Aquastop tapes and membranes. Moisture-curing.
Two-component, anti-alkali and chlorine-resistant, mineral waterproofing product with high flexibility, adhesion and durability.
Certified, eco-friendly, organic, water-based, mineral waterproofing product for absorbent substrates in damp environments.
Neutral, silane waterproof sealant.
Eco-friendly, water based, flexible organic mineral covering for non-slip protection of Aquastop Nanoflex waterproof membrane.
Eco-friendly, water-based vapour barrier and waterproofing protection for compact, absorbent and non-absorbent substrates.
Reactive waterproofing product with high chemical resistance and high adhesion and flexibility.
Decoupling panel in synthetic fibre for the thermal and acoustic insulation, and reduction of transmitted impact noise, to be laid with a thin layer of adhesives from the Biogel range.
Flexible NBR waterproof joint for perimeter and fractionizing joints in waterproofing systems. For use under ceramic and porcelain tiles and natural stone. Bonds directly on application.
Improved adhesion waterproof elastic tape for joints. The three-layer structure with a waterproofing alkali-resistant TPE central core and polypropylene fibres guarantees extreme compatibility with waterproofing products.
Elastic NBR seal for pipes and drains, to be used prior to laying of ceramic, porcelain tiles and natural stone. Applied by cold bonding.
Improved adhesion waterproof elastic flange.
The three-layer structure with a waterproofing alkali-resistant TPE central core and polypropylene fibres guarantees extreme compatibility with waterproofing products.
Flexible area in the centre facilitates sealing of pipes and drains.
Alkali-resistant reinforcing mesh without memory effect, for Aquastop Nanoflex.
Butyl adhesive tape coated in high-adhesion, non-woven, alkali-resistant polypropylene with a pre-cut, silicone film halfway along the back for perimeter joints that also have a bituminous sheath, PVC, wood, polycarbonate, glass, plastic or metal materials.
NBR rubber, under-tile waterproof elastic tape coated on both sides with high-adhesion non-woven polypropylene for structural joints in waterproofing systems on balconies, terraces and flat roofs coated with ceramic tiles and stone material.
High quality ASA perimeter drain with seamless wall-floor sides coated in non-woven polypropylene to guarantee a good seal with Aquastop Nanoflex mineral membrane, using eco-friendly Aquastop Fix sealant and gel adhesives from the Biogel range.
Central polypropylene drain with waterproof polyethylene membrane coated on both sides with polypropylene fabric, for use in Kerakoll waterproofing systems.
Certified, extra rapid, eco-friendly, mineral self-levelling product for the high-performance and high-thickness correction of irregular substrates.
Certified, fast-acting, eco-friendly, mineral levelling product for the high-performance, high-thickness correction of irregular substrates.
Organic, eco-friendly mineral finishing product for compact, absorbent substrates and non-absorbent substrates.
Composite, natural, mineral matrix, technical plaster/render made from pure natural NHL lime and geo-binder with TPI 3D technology texture, for breathable plastering/rendering with zero crack risk; applicable in thicknesses of up to 30 mm in a single coat. Class CS III and M5.
Certified, universal breathable plaster/finishing coat made of pure natural NHL lime and geo-binder - from 3 to 30 mm. Water-repellent, specific as a levelling plaster/finishing coat for absorbent surfaces or synthetic coverings in the restoration of buildings, the renovation of old facades, and fine Historical Restoration. Thanks to its properties, it is specific for use as anti-collapse protective system for stud walls and as break-away protection system for brick and cement floor slabs. Ideal for finishing certified structural reinforcement systems created with epoxy or mineral matrix.
Recycled and thermo-bonded polyester, reinforced anti-fracture membrane, specifically designed to absorb shear stresses between substrates and bonded coatings; suitable as reinforcement for the laying of ceramic tiles of all kinds, large formats, porcelain tiles and natural stone.
Compressible, closed-cell expanded polyethylene tape for reduced-thickness perimetric joints of desolidarisation.
Professional cleaning wipes
Rapid drying, degreasing detergent for the preparation of substrates, smoothing of joints and post-installation cleaning.
Organic mineral water-based elastomeric resin paint.
Cleaner for guns and PU foams.
Self-expanding foam for filling and fastening. Fire-resistant.
Certified, eco-friendly, natural plaster made with pure natural lime NHL 3.5 according to EN 459-1, for highly breathable plasterwork.
Organic, mineral paint, based on water-based styrene-acrylic resins with high coverage, high filling power and matt effect finish.
Self-levelling, high-performance coloured organic mineral coating for industrial floors.
Highly vapour-permeable coloured organic mineral coating for industrial floors.
Epoxy protective product with high chemical resistance for concrete.
Gravel with 3-6 mm grading curve.
Polyurethane with high modulus of elasticity - high strength, for bonding
High modulus hybrid polymer-based adhesive
Hybrid sealant under-tile bonding quick curing
High modulus, hybrid polymer-based adhesive sealant
PU sealant for under-tile bonding quick curing
Certified, eco-friendly, natural mortar containing pure NHL 3.5, EN 459-1 compliant lime to create extremely breathable rough coats and for the fragment-filling and structural reinforcement of masonry.
Eco-friendly thinner for epoxy and polyurethane resins.
Mineral geo-paint for decorative protection of concrete. Breathable, anti-carbonation. Fine grain effect.
Expansive pourable mortar for structural grouting.
Anti-corrosive cement-based protective product for reinforcing bars.
Self-expanding foam for filling and fastening.
Certified, eco-friendly, elastic, organic, mineral adhesive for the high-performance laying of hardwood floors.
Organic, elastic mineral adhesive for the high-performance laying of hardwood floors.
Fluid epoxy system for construction joints, grouting on concrete, synthetic mortars and finishings.
Fibre-reinforced pourable mortar with compensated shrinkage for reinforced concrete structural repair.
Hybrid adhesive for bonding of hardwood floors, isocyanate and solvent free
Certified, eco-friendly, organic, mineral adhesive for the high-performance laying of hardwood floors.
Certified, eco-friendly, organic adhesive for bond when used to secure tongue-and-groove ends in floating hardwood floors and laminated floors.
Certified, organic, mineral adhesive for the high-performance laying of hardwood floors.
Organic, elastic mineral adhesive for the high-performance laying of hardwood floors.
Mineral adhesive for high adhesion, high-performance laying of porcelain tiles.
Fibre-reinforced thixotropic mortar with compensated shrinkage for reinforced concrete and masonry structural repair.