All Products

Acrylic adhesive sealant for anchoring

High tack hybrid polymer based adhesive.

High modulus hybrid polymer-based adhesive

High modulus, hybrid polymer-based adhesive sealant

RAL finish neutral silicon sealant. Window installations and woodworking. Glazing and sealing.

Coloured, neutral silicone sealant

Transparent, neutral silicone sealant

Polyurethane expanding foam. Polymerisation in contact with moisture and air. HCFC-free propellant.

Fireproof polyurethane expanding foam

Polyurethane foam, may be used either with an applicator gun or manually with its application nozzle. Low-pressure polymerisation for moderate post-expansion without deforming the materials.

Polyurethane with high modulus of elasticity - high strength, for bonding

Manual gun for cartridges and bags up to 400 ml.
Manual gun for bags up to 600 ml.

PU sealant for under-tile bonding quick curing

Silicone acetic sealant

Plastic acrylic sealant

Hybrid sealant under-tile bonding quick curing

Low modulus polyurethane sealant for sealing of expansion joints

Plastic acrylic sealant, fire resistance class M1

Skeleton gun for cartridges.

Liquid waterproofing membrane

Teflon gun for polyurethane foam.

Liquid waterproofing membrane

Cleaning product for guns and fresh PU foam stains

Professional cleaning wipes

Rapid drying, degreasing detergent for the preparation of substrates, smoothing of joints and post-installation cleaning.

Decorative sealant for ceramics, mosaics and swimming pools.

Certified, eco-friendly, organic mineral adhesive to lay small and medium-format hardwood floors.

Organic, elastic mineral adhesive for the high-performance laying of hardwood floors.

Hybrid adhesive for bonding of hardwood floors, isocyanate and solvent free.

Certified, eco-friendly, organic adhesive for bond when used to secure tongue-and-groove ends in floating hardwood floors and laminated floors.

Self-expanding foam for filling and fastening.

Certified, organic, mineral adhesive for the high-performance laying of hardwood floors.

High coverage wall paint containing Pliolite resins for stained and marked substrates.

Eco-friendly, high diffusion power consolidant based on ethyl esters from silicic acid.

Certified natural plaster made with pure natural lime NHL 3.5 according to EN 459-1, for highly breathable and rendering of the base of walls.

Extra fast-acting, bonding agent for gaps and cracks.

Anti-corrosive cement-based protective product for reinforcing bars.

Latex for mineral levelling and finishing products. Suitable as consolidant primer for plasters/renders and mineral and cement-based absorbent finishing coatings.

Special calibrated fracture, sharp-edge silicon carbide (SIC) double disk. Superior, extended lifetime. Ideal for removing scratches made by sanders and edge-polishers on all types of wood before final sanding. The three-cut design to gather any harder parts removed during smoothing that could mark the surface guarantees finely sanded floors.

Abrasive net with calibrated fracture, wedge-shaped silicon carbide on both sides. The constant production of new, sharper abrasive grits during processing keeps a fine point on the mineral until it has been completely used, guaranteeing perfectly sanded floors.

Inco-Tex fabric pad to clean, maintain and polish floors.

Eco-friendly, water-repellent impregnating product, with water-drop effect and high penetration capacity.

Water-repellent, strengthening, high diffusion power protective product.

Organic, mineral, breathable paint, containing water-based vinyl-versatate resins.

Eco-friendly, water-repellent, breathable protective impregnating, water-drop effect product, that does not alter the colour of materials treated.

Calcium carbide hygrometer to measure residual humidity in substrates and materials.

Electronic measuring device for the non-invasive detection of humidity in substrates and materials.

Metal spreaders to apply organic mineral adhesives.

Special synthetic fibre roller designed to improve applied performance of liquid organic varnishes for hardwood floors. Specifically intended to apply HP Technology varnishes.

Organic adhesive for the fixing of self-laying PVC and rubber floor coverings on compact absorbent and non-absorbent substrates.

Fibre-reinforced thixotropic mortar with compensated shrinkage for reinforced concrete structural repair.

Certified, organic mineral adhesive, to lay PVC, LVT and rubber floors and coverings up to a thickness of 3 mm, linoleum and carpet on absorbent substrates.

Compressible, closed-cell expanded polyethylene tape with fibre support for low-thickness perimetric joints of desolidarisation. With very low volatile organic compound emissions.

Compressible, closed-cell expanded polyethylene tape for perimeter and desolidarisation joints.

Compressible, closed-cell expanded polyethylene tape for reduced-thickness perimetric joints of desolidarisation.

Certified, organic mineral adhesive to lay linoleum, standard and needle-punched carpeting.

Certified, organic mineral adhesive to lay PVC and PVC-backed materials on absorbent substrates.

Organic, neoprene fluid adhesive for the double-spread laying of PVC, rubber, carpeting and linoleum.

Organic, neoprene adhesive for the double-spread laying of PVC, rubber, carpeting and linoleum.

Professional detergent for joints hygiene.

Scraper for joints.

High-performance, expansive, superfluid cement-based binder for concrete, fine grain concrete and mortar.

Fibre-reinforced thixotropic mortar with compensated shrinkage for reinforced concrete and masonry structural repair.

Eco-friendly, organic, fibrous, mineral covering, completely coloured, based on water-based acrylic-siloxane resins and waterproofing siloxanes.

Eco-friendly, organic, mineral, elastomeric resin paint that is flexible and resistant to algae and atmospheric agents.

Organic, mineral covering, completely coloured, based on water-based siloxane resins.

Mineral geo-paint for decorative protection of concrete. Breathable, anti-carbonation. Fine grain effect.

Anti-carbonation, elastic, cement-based protective product for concrete.

Epoxy protective product with high chemical resistance for concrete.

Gravel with 3-6 mm grading curve.

High quality ASA perimeter drain with seamless wall-floor sides coated in non-woven polypropylene to guarantee a good seal with Aquastop Nanoflex mineral membrane, using eco-friendly Aquastop Fix sealant and gel adhesives from the Biogel range.

Butyl adhesive tape coated in high-adhesion, non-woven, alkali-resistant polypropylene with a pre-cut, silicone film halfway along the back for perimeter joints that also have a bituminous sheath, PVC, wood, polycarbonate, glass, plastic or metal materials.

Decoupling panel in synthetic fibre for the thermal and acoustic insulation, and reduction of transmitted impact noise, to be laid with a thin layer of adhesives from the Biogel range.

NBR rubber, under-tile waterproof elastic tape coated on both sides with high-adhesion non-woven polypropylene for structural joints in waterproofing systems on balconies, terraces and flat roofs coated with ceramic tiles and stone material.

Central polypropylene drain with waterproof polyethylene membrane coated on both sides with polypropylene fabric, for use in Kerakoll waterproofing systems.

Improved adhesion waterproof elastic flange. 
The three-layer structure with a waterproofing alkali-resistant TPE central core and polypropylene fibres guarantees extreme compatibility with waterproofing products.
Flexible area in the centre facilitates sealing of pipes and drains.

Natural, eco-friendly mangiaVOC grout based on exclusive Kerakoll Biogesso for grouting and finishing of plasterboard sheets. Actively absorbs and reduces indoor pollutants.

Natural, eco-friendly mangiaVOC finishing product and decorative fine plaster/render based on exclusive Kerakoll Biogesso which actively absorbs and reduces indoor pollutants.

Certified, extra rapid, mineral self-levelling product for the high-performance and high-thickness correction of irregular substrates.

Certified, thixotropic, normal-setting mineral levelling product for the high-performance correction and prolonged workability of irregular substrates.

Organic, mineral finishing product for compact, absorbent substrates and non-absorbent substrates.

Thinner for epoxy and polyurethane resins.

Epoxy system for the preparation of substrates before creating resin-based continuous flooring.

Self-levelling, high-performance coloured organic mineral coating for industrial floors.

Transparent, water-based, organic, liquid impregnating agent, for dust-proof treatment of industrial concrete floors.

Highly vapour-permeable coloured organic mineral coating for industrial floors.

Transparent, protective water-based micro-resin for Wallcrete and Patina resin coverings.

Alkali-resistant fibreglass reinforcing mesh to strengthen synthetic and mineral finishing coats.

Coloured base coat for Cementoresina floors.

Cleaner for guns and PU foams.

Organic, velvety, mineral breathable paint, based on water-based vinyl resins with high coverage and matt effect finish.

Breathable, organic, mineral paint with high filling power, high coverage and matt effect finish.

Organic, mineral paint, based on water-based styrene-acrylic resins with high coverage, high filling power and matt effect finish.

Nourishing wax for the maintenance of continuous floors.

Regenerating satin-finish treatment to restore worn surfaces in continuous floorings.

Protective water-based impregnating finish for Patina and Patina Living resin coverings.

Innovative mineral matrix composite, structural base layer for Cementoresina Wall and for the repair of irregular substrates.

Concentrated, wax-removing detergent for the removal of residual wax, oil and grease from resin, resilient materials, marble, ceramic floors.

Certified, ready-to-use, extra-rapid setting and drying mineral screed for laying with adhesives.

Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, rapid setting 10 min.

Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, normal setting 80 min.

Mineral, lightened geo-mortar/finishing product for concrete reconstruction and finishing. Thixotropic. Thicknesses from 2 to 50 mm.

Mineral geo-mortar with geo-binder base for FRC monolithic strengthening of reinforced concrete. Pourable and fibre-reinforced with Steel Fiber.

Rapid-setting, fibre-reinforced semi-thixotropic mortar for road, industrial and urban maintenance work.

Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Multipurpose, pourable, normal setting 60 min.

Eco-friendly, organic, mineral intermediate coat based on water-based siloxane resins, to prepare substrates for the decorative cycle.

Universal, consolidant primer for walls.

Eco-friendly, stabilizing primer in high binding power, pure acrylic-siloxane micro-emulsions.

Stabilizing primer based on pure powerful high-binding acrylic resins.

Fluid epoxy system for construction joints, grouting on concrete, synthetic mortars and finishings.

Adhesive for SRP monolithic strengthening of reinforced concrete. Thixotropic, for structural bonding and grouting.

Universal, consolidating adhesion promoter for mortars and plasters/renders.

Hyperfluid epoxy system for the injection of cracks and grouting on concrete.

Stabilizing consolidant, based on acrylic resins dissolved in solvent, specifically for old and fragmented render/plaster coats. Safeguards the health of operators.

TPO-based, high performance waterproofing liquid membrane. Ideal for flat roofs, bituminous layers and external surfaces, flexible even at very low temperatures. Suitable for the containment of water, resistant to UV light and atmospheric agents.

Non-slip coating with high resistance to wear, suitable for foot traffic, for surfaces waterproofed with rainproof protection from the Bioscud range, resistant to UV light, atmospheric agents and standing water.

Organic, mineral water-based acrylic paint, with waterproofing siloxanes, with high filling power and coverage, matt and compact effect.

Organic, mineral, glaze-effect paint covering, based on water-based acrylic-siloxane resins.

Organic, mineral quartz water-based styrene-acrylic paint, with anti-biodeteriorating additives, high coverage and matt effect finish.

Water-based, liquid, acrylic, waterproofing membrane. Suitable for flat and pitched roofs, bituminous layers and external surfaces, flexible, resistant to UV light, atmospheric agents and standing water.

Organic, mineral rust-preventive, anti-corrosive paint.

Flexibilizing agent for mineral mortars and fine grain concrete. 

Eco-friendly, fine, mineral plaster/render finish.

Eco-friendly, mineral finishing coat.

High-protection impregnating gel, high UV rays resistance and to atmospheric agents.

Base and finish coat glaze, resistant to atmospheric agents, excellent coverage and easy to apply with a brush.

Thinner high solvent power and slow evaporation.

Eco-friendly, slow evaporation thinner.

Eco-friendly, protective and decorative glossy-effect glaze, resistant to atmospheric agents, excellent coverage, no “blocking” and high elasticity.

Antique-effect, anti-corrosive protective glaze with excellent coverage and easy to apply with a brush.

Eco-friendly, thixotropic, extra-rapid setting and hardening mineral mortar, suitable for high-performance anchoring.

Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G600 is specific for use in structural strengthening in combination with Geocalce and Geolite mineral matrices or Geolite Gel organic matrix according to project and site requirements.

Retractable insert, in fibreglass-reinforced polypropylene, specific to anchor Steel Dryfast 8-10 stainless steel helical bars. The system allows effective mechanical connection of band and widespread strengthening systems created using the Geosteel range of meshes and sheets on vertical load-bearing walls, arches and domes or for consolidation of brick and cement floor slabs subject to break-away of the bottom layer.

Pneumatic bender to shape the Geosteel extra-high strength galvanized steel fiber sheets.

Manual bender to shape the Geosteel ultra-high strength galvanized steel fibre sheet.

Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G3300 is specific for use in structural reinforcements in combination with Geolite Gel organic matrix.

Bi-axial mesh made of alkali-resistant glass and aramid fibre, specific for strengthening, the improvement and the anti-seismic adaptation for low thickness in reinforced concrete buildings, with brick infill, and masonry structures.

The AISI 304/316L stainless steel helical bar, with a 8-10-12 mm diameter, is a high mechanical performance stainless steel helical bar for connection and for dry binding of structural elements using the dry installation system.

AISI 304 stainless steel “T” connector between the Steel Dryfast 6 stainless steel helical bar, installed inside the exposed wall surface joints, and the Steel Dryfast 10 stainless steel helical bars, installed to create the dry joining of masonry.

Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G1200 is specific for use in structural strengthening in combination with Geocalce and Geolite mineral matrices or Geolite Gel organic matrix according to project and site requirements.

Unidirectional, extra-high strength galvanized steel fibre sheets, made of steel micro-cords, fixed to a fibreglass micromesh. Geosteel G2000 is specific for use in structural strengthening in combination with Geolite Gel organic matrix.

Fibre-reinforced pourable mortar with compensated shrinkage for reinforced concrete structural repair.

Driver attachment with coupling for SDS Plus percussion or hammer drill for installing Steel Dryfast stainless steel helical bars.

Large-grain, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fine-grain mineral concrete to be used with electro-welded meshes in certified structural reinforcement, improvement and seismic adaptation systems. Suitable for consolidation and repair of masonry works. Certified to improve the safety of buildings.

Composite, natural, mineral matrix, technical plaster/render made from pure natural NHL lime and geo-binder with TPI 3D technology texture, for breathable plastering/rendering with zero crack risk; applicable in thicknesses of up to 30 mm in a single coat. Class CS III and M5.

Certified, universal breathable plaster/finishing coat made of pure natural NHL lime and geo-binder - from 3 to 30 mm. Water-repellent, specific as a levelling plaster/finishing coat for absorbent surfaces or synthetic coverings in the restoration of buildings, the renovation of old facades, and fine Historical Restoration. Thanks to its properties, it is specific for use as anti-collapse protective system for stud walls and as break-away protection system for brick and cement floor slabs. Ideal for finishing certified structural reinforcement systems created with epoxy or mineral matrix.

Fluid, breathable structural geo-mortar made from pure natural NHL lime and geo-binder – Class M15. Specific for use as a fluid mineral mortar in consolidating injections and as a matrix in combination with Geosteel galvanised steel fibre thread connectors to create certified connections for structural reinforcement, improvement and seismic adaptation. Certified to improve the safety of buildings.

Certified, breathable plaster/render made from pure natural NHL lime and geo-binder – Class CS II. Specific for restoration of brick, stone, mixed material, tuff and masonry structures. Ideal as plaster/render for high-thickness finish in certified structural reinforcement, improvement and seismic adaptation systems.

Eco-friendly, natural, certified, spreader/trowel applied plaster based on selected pure CL 90-S lime putty and containing natural coloured soils, compliant with EN 459-1 standard.

Certified, eco-friendly, natural plaster based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and containing natural coloured soils.

Certified, eco-friendly, uniforming mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and selected inert materials.

Certified, eco-friendly, uniforming, universal mineral coat based on selected pure CL 90-S lime putty compliant with EN 459-1 standard and natural, micronized casein.

Certified, eco-friendly, natural plaster made with pure natural lime NHL 3.5 according to EN 459-1, for highly breathable plasterwork.

Certified, eco-friendly, natural finishing coat containing pure NHL 3.5, EN 459-1 compliant lime for highly breathable medium-grain finishing of plasters/renders.

Certified, eco-friendly, natural mortar containing pure NHL 3.5, EN 459-1 compliant lime to create extremely breathable rough coats and for the fragment-filling and structural reinforcement of masonry.

Certified, eco-friendly natural intermediate filling coat based on pure stabilized potassium silicate.

Certified, eco-friendly, natural wall paint based on pure stabilized potassium silicate, with natural coloured earths and minerals.

Certified, eco-friendly, natural fine render, based on pure stabilised potassium silicate, completely coloured with natural soils and minerals.

Deformable mineral adhesive with an extremely high natural additive content for high performance bonding of porcelain tiles, ceramic tiles and natural stone, with no vertical slip and long open time.

Water-based elastic agent for normal- and rapid-setting mineral adhesives.

Elastic organic adhesive for high-performance and high-adhesion laying with no vertical slip on deformable substrates of porcelain tiles, ceramic tiles and natural stone.

Mineral adhesive with an extremely low chemical additive content. Longer workability with accelerated adhesion for high performance bonding, with no vertical slip, of porcelain, ceramic and natural stone tiles.

ETICS adhesive-finishing product for the high-adhesion laying of heat-insulating panels.

Low-density ETICS adhesive-finishing product with NHL lime for the laying of mineral and natural heat-insulating panels.

ETICS adhesive-finishing product for the laying of heat-insulating panels on absorbent substrates. 

ETICS adhesive-finishing product with enhanced adhesion specific for anchor-less Klimaexpert ETA EPS.

Water based gel for filling defects and deep cracks.

Eco-friendly retardant additive for water-based varnish from the Aqua-Pur range.

Treatment to protect hardwood floors.

Rapid-drying water-based base coat varnish for the protection of hardwood floors.

Certified, water-based base coat varnish to protect hardwood floors.

Water-based varnish to protect hardwood floors.

Coloured wooden skirting board strip, neutral, to be coloured on site or with Legno Nat finish (natural oak wood); designed to match the wall colour.

Engineered tongue-and-groove wood planks for internal flooring and paneling, chamfer on 2 sides. Timber type Oak. Format 70x1250 mm, thickness 10 mm. Adhesive laying.

Pre-sanded, unfinished, solid wood strips made from Oak, with tongue-and-groove joints on 2 long sides and chamfer on all 4 sides. Format 50x400 mm, thickness 10 mm. Adhesive laying.

Pre-sanded, unfinished, solid wood strips made from Oak, with tongue-and-groove joints on 2 long sides and chamfer on all 4 sides. Format 42x300 mm, thickness 10 mm. Adhesive laying.

Multipurpose Gel-Adhesive, structural, highly flexible, thixo & fluid, with accelerated adhesion. For all types and sizes of porcelain tiles, ceramic tiles and natural stones.

Replaces Biogel Revolution.

Coloured micro-resin base coat for the re-design of existing floors suited for medium foot traffic.

Self-levelling product with silk effect finish and perfect evenness, ideal for laying resilient material coverings.

Coloured texturizing finishing coat for Patina and Patina Living resin coverings.

Superflat, high performance finish plaster for Wallpaper resin covering.

Resin covering for external use with a coloured-body material texture and high colour resistance. Unparalleled protection of the building from atmospheric agents.

Decorative water-based paint with an extra-matt natural finish and high colour depth.

Coloured base texturizing agent for Stripe Living resin covering.

Smooth finish plaster for Wallpaper Living resin covering. Ideal for preparing flat walls before applying the paint.

Thixotropic agent for synthetic binding or finishing products.

Mineral geo-mortar with geo-binder base for monolithic grouting in reinforced concrete. Pourable, rapid setting 20 min.

Mineral geo-mortar with geo-binder base for monolithic repair of reinforced concrete. Thixotropic, semi-rapid setting 40 min.

Eco-friendly, stabilizing primer in a powerful high-binding micro-emulsion.

Organic mineral intermediate coat for the preparation of substrates before applying the decorative cycle.

Single-component, solvent-based adhesion promoter for the preparation of non-absorbent or poorly absorbent and very compact substrates before applying Bioscud, Bioscud BT and Bioscud Fiber.

Specific thinner for diluting Bioscud Artic coloured elastomeric rainproof waterproofing protection when applied as a preparation coat on absorbent substrates.

Water-based, liquid, bituminous, waterproofing membrane. Suitable for roofs, bituminous layers and concrete products, elastomeric, resistant to UV light, atmospheric agents and standing water.

Polyester staple fibre non-woven fabric for Bioscud Bioscud BT and Bioscud Artic reinforcement.

Organic, mineral paint, based on water-based acrylic-siloxane resins, with anti-biodeteriorating additives, high coverage and matt effect finish.

Organic mineral water-based elastomeric resin paint.

Water-based, liquid, acrylic, fibre-reinforced, waterproofing membrane. Suitable for roofs, bituminous layers and external surfaces subject to foot traffic, flexible, resistant to UV light, atmospheric agents and standing water.

Eco-friendly, protective and decorative satin-effect glaze, resistant to atmospheric agents, excellent coverage, no “blocking” and high elasticity.

Organic mineral preparation coat.

Eco-friendly stabilizing agent to strengthen old and fragmented plaster/render coats.

Eco-friendly, mineral, organic grout for a highly flexible and ultra-smooth final finish.

Eco-friendly, fine, mineral plaster/render finish.

Eco-friendly, mineral finishing coat.

Eco-friendly, single-component mineral adhesive&finishing product.

Eco-friendly, fine, mineral plaster/render finish.

Balanced bi-axial mesh made of special basalt fibre and AISI 304 stainless steel micro-threads, welded and protected with alkali-resistant treatment, guarantees stability and performance in both directions. Easy to apply, specific for perfect meshing with Geocalce F Antisismico.

AISI 304/316L stainless steel helical bar, with a 6 mm diameter, with high mechanical performance stainless steel helical bar for reinforced grouting of joints using the dry installation system.

Balanced bi-axial mesh made of special basalt fibre and AISI 304 stainless steel micro-threads, welded and protected with alkali-resistant treatment, guarantees stability and performance in both directions. Easy to apply, specific for perfect meshing with Geocalce F Antisismico.

Balanced, bi-axial, alkali-resistant, basalt fibre mesh specific to repair structural elements or protect non-structural elements at risk of collapse and break-away.

Polypropylene and fibreglass injector, specific thread connector systems, made directly from the extra-strong Geosteel galvanised steel fibre sheets range. Ideal to create fibre thread connecting systems for Geosteel mesh band and mesh sheet strengthening elements.

Extra-quick-setting and hardening mortar for instant blocking of water leaks.

Steel fibers for concrete and mortars with very high mechanical resistance.

Mineral grout for ceramic tiles and natural stone. High workability and high-performance, ultra-cleanable.

Ultra-matt, elastic decorative sealant.

Transparent sealant for ceramic tiles and mosaics.

Waterproof, photochromatic, decorative resin for the grouting and bonding of glass mosaic and low-thickness ceramic tiles. Guarantees aesthetic continuity.

Certified, eco-friendly, natural mortar containing pure NHL 3.5, EN 459-1 intended for highly breathable rough rendering and pointing of masonry.

Certified, eco-friendly, natural uniforming intermediate coat based on pure stabilized potassium silicate.

Natural, eco-friendly, breathable, stabilizing cortical consolidant based on pure stabilized potassium silicate, solvent-free.

Waterproof decorative resin for the grouting and bonding of ceramic tiles, mosaics and natural stones. Easy to clean, stain-proof.

Mineral adhesive with an extremely low chemical additive content for high performance bonding with no vertical slip and long open time, for porcelain tiles, ceramic tiles and natural stone.

Mineral adhesive for high adhesion, high-performance laying of porcelain tiles.

Mineral adhesive for high performance bonding of porcelain tiles, ceramic tiles and natural stone, with no vertical slip and long open time.

Mineral adhesive for high adhesion, high-performance laying of porcelain tiles.

Decorative sealant for ceramics, mosaics and swimming pools.

High performance, fibre-reinforced finishing product for ETICS use, hail- and collision-resistant, for repairing damages and deterioration.

Gel for filling defects and deeper cracks.

Water-based oil-resin for the treatment of floors and wooden products in external applications.